CATALOG      LOG-IN      SHOP     
×
MENU ☰
Home > Products > Oil & Lubricants > DRYZOIL Oil/Water Absorber – Pails & Small Equipment
B3C Logomark

DRYZOIL Oil/Water Absorber – Pails & Small Equipment

$19.99

Qty

Category:

Description

WATER REMOVAL WITHIN THE OIL

We manufacture the world’s FIRST and ONLY solutions to remove and prevent moisture (water bound) in oil and machine fluids while stabilizing the oil. Our water absorbers for oil keep oil and fluid systems running efficiently while avoiding costly damage and downtime. While standard filters help keep systems clean, solutions to keep systems dry are limited.

This small oil water absorber removes water from within the oil, is disposable and is sized for pails and small sized equipment.

Features/Benefits/Applications

  • Patented
  • Molecular sieve drying technology
  • Removes water in oil
  • Helps stabilize oil
  • Simple to use; low cost
  • Sinks to bottom of container
  • Disposable
  • Approx. 7″ x .7″ diameter
  • Sized for 5 gallon pails and small sized equipment

Understanding Oil Problems & Solutions »

Product Overview Sheet »

Technical Bulletin: Why New Oil & Oil in Storage Will Be Water Contaminated & How to Fix & Prevent the Problem »

Where To Buy »

Additional information

Weight 5 oz

Related products

Featured Fuel Solutions
Better Than Oil

Better Than Oil

Better Than Oil
product diesel gal

DIESEL FUEL TREATMENT

product diesel gal
Friction Fix

Friction Fix

Friction Fix
mulch stay-put

Mulch Stay

mulch stay-put
product-ethanol-shield-marine

Ethanol Shield Marine

product-ethanol-shield-marine
hydraulic oil fix

Hydraulic Oil Fix

hydraulic oil fix
product-mechanic-bottle

Mechanic In A Bottle

product-mechanic-bottle
product-ethanol-shield

Ethanol Shield

product-ethanol-shield
product-fuel-life

In-Tank Stabilizing

product-fuel-life
product-find-fix

Gas Test Swabs

product-find-fix

What They Say

About B3C's Products

I received information about Ethanol Shield from Yamada Nursery. I used it in my lawn mower and then put it in my car and got very good results. I now recommend your product to all of car collector friends.

~ John W.

I've used Ethanol Shield for several years in my: 1940 car that I rarely start, blue bird day only '72 Honda 500 motorcycle, spring/fall power washer, fall only leaf blower, and when need be chain saw.

...and they all start every time!

- Mike G.

Used this product for almost a year, no issues whatsoever. Believe it’s does what it says it’s supposed to do.

- Shawn Walker

You'll hear when this stuff hits your engine. Makes everything all better!

- Joesph B Moffett

I must say that it lived up to all the hype. I've used it in several small engines from rototillers and snow blowers to atvs and go karts and it has worked in all of them. Many of them ran very rough and wouldn't idle, or wouldn't start at all, but after adding MIB they all run much better and continue to improve the longer they run. I added some to my truck that would missfire intermittently and after just a couple of days it was running much smoother and the check engine light went out. I'm very impressed with this to say the least.

- Allan

I've used it in a few different situations where either a two-cycle motor was running rough or a four-cycle wouldn't start. Just following the directions was all that was needed. To help the solution do it's job, I always have the battery fully charged in the situations where I have and electric starter. It is worth having a bottle or two of this stuff around if you have a lot of engines that must be stored or not used daily (especially seasonal stuff).

- Jif

If you have gas powered equipment, never be out of this stuff. It’s a miracle in a jar. If you put it in you tanks of gas power equipment and let it sit it will start. If you find a piece of equipment that has stale old gas, a few ounces of this and it will start up.

- Terance LaCroix

I had problems with a snow blower that I used high ethanol gas in not starting. Added some Mechanic In A Bottle to an empty tank and let sit overnight - added gas w/Mechanic In A Bottle the next day & it fired up on the first pull. I love this stuff.

- Murphy@216

For about $20 every fall, one application of this to my snowblower gets and keeps it running through the winter, saving costly trips to the repair shop to clean/rebuild the carb. which I did for several years until figuing out it was always a fuel problem.

- S. Wilde

Forgot to put stabilizer in the gas of my outboard for over winter storage, with predictable results. Put some Mechanic in a bottle into the carb and let it sit for 24 hours. Started right up and ran better than ever. Sea Foam is good, but this stuff raises the bar.

- M.E. Dunn

Join Us!

For News & Discounts