Description

Restore parts faster with Mechanic In A Bottle PRO Ultrasonic Cleaner & Degreaser Solution. This professional-strength, ultra-concentrated ultrasonic cleaning fluid is engineered to reach the smallest cavities to remove grease, carbon deposits, varnish, gum, oil, dirt, and other stubborn contaminants from carburetors, fuel injectors, engine parts, tools, and precision metal and plastic components. Our advanced water-based formula combines powerful cleaning and degreasing performance with Anti-Evaporation Technology, Chelating Decarbonizing Agents, Superior Rinseability, and a Water Based, Solvent Free Formulation to help leave parts clean and ready for reassembly. One 128 oz bottle makes up to 8 gallons of ultrasonic cleaning solution, delivering professional cleaning performance and exceptional value. Proudly Made in the USA.

SCIENTIFICALLY ENGINEERED – Engineered specifically for use in ultrasonic cleaning machines and engineered to reach the smallest cavities to quickly remove grease, carbon, varnish, gum, oil, dirt, and other stubborn contaminants from metal and plastic components.
MAKES 8 GALLONS – Ultra-concentrated formula makes up to 8 gallons of professional ultrasonic cleaning solution, providing exceptional value for shops, technicians, and DIY users.
COMPREHENSIVE CLEANING – For ALL metal & plastic parts. Cleans the toughest contaminants on carburetors, fuel injectors, throttle bodies, valves, pistons, engine components, small engine parts, marine parts, motorcycle components, and precision mechanical assemblies.
UNIVERSAL COMPATIBILITY: Works with a wide range of metals and plastics, including aluminum, aluminum alloys, brass, cast iron, copper, copper alloys, ferrous metals, magnesium, yellow alloys, zinc, and coins.
WATER-BASED PROFESSIONAL FORMULA – Features Anti-Evaporation Formula, Chelating Decarbonizing Agents, Superior Rinseability, Solvent Free Formulation, and biodegradable ingredients for outstanding cleaning performance.
MADE IN THE USA – Designed for automotive, motorcycle, marine, powersports, industrial, restoration, outdoor power equipment applications and more.

Additional information

Weight	130 oz

What They Say

About B3C's Products

I received information about Ethanol Shield from Yamada Nursery. I used it in my lawn mower and then put it in my car and got very good results. I now recommend your product to all of car collector friends.

~ John W.

I've used Ethanol Shield for several years in my: 1940 car that I rarely start, blue bird day only '72 Honda 500 motorcycle, spring/fall power washer, fall only leaf blower, and when need be chain saw.

...and they all start every time!

- Mike G.

Used this product for almost a year, no issues whatsoever. Believe it’s does what it says it’s supposed to do.

- Shawn Walker

You'll hear when this stuff hits your engine. Makes everything all better!

- Joesph B Moffett

I must say that it lived up to all the hype. I've used it in several small engines from rototillers and snow blowers to atvs and go karts and it has worked in all of them. Many of them ran very rough and wouldn't idle, or wouldn't start at all, but after adding MIB they all run much better and continue to improve the longer they run. I added some to my truck that would missfire intermittently and after just a couple of days it was running much smoother and the check engine light went out. I'm very impressed with this to say the least.

- Allan

I've used it in a few different situations where either a two-cycle motor was running rough or a four-cycle wouldn't start. Just following the directions was all that was needed. To help the solution do it's job, I always have the battery fully charged in the situations where I have and electric starter. It is worth having a bottle or two of this stuff around if you have a lot of engines that must be stored or not used daily (especially seasonal stuff).

- Jif

If you have gas powered equipment, never be out of this stuff. It’s a miracle in a jar. If you put it in you tanks of gas power equipment and let it sit it will start. If you find a piece of equipment that has stale old gas, a few ounces of this and it will start up.

- Terance LaCroix

I had problems with a snow blower that I used high ethanol gas in not starting. Added some Mechanic In A Bottle to an empty tank and let sit overnight - added gas w/Mechanic In A Bottle the next day & it fired up on the first pull. I love this stuff.

- Murphy@216

For about $20 every fall, one application of this to my snowblower gets and keeps it running through the winter, saving costly trips to the repair shop to clean/rebuild the carb. which I did for several years until figuing out it was always a fuel problem.

- S. Wilde

Forgot to put stabilizer in the gas of my outboard for over winter storage, with predictable results. Put some Mechanic in a bottle into the carb and let it sit for 24 hours. Started right up and ran better than ever. Sea Foam is good, but this stuff raises the bar.

- M.E. Dunn

PRODUCTS

ABOUT

RESOURCES

MORE

Mechanic in a Bottle PRO Ultrasonic Cleaner & Degreaser, Makes Up to 8 Gallons, Carburetor Cleaner, Cleans Fuel Injector, Engine Part, Plastic. Water-Based Made in USA, 128 oz

Description

Additional information

Featured Fuel Solutions

Fuel Life

Spill Absorber Max

No-Mess Oil Change

Pump Saver

BIODEGRADABLE BAR & CHAIN

DIESEL FUEL TREATMENT

Mulch Stay

Ethanol Shield Marine

Hydraulic Oil Fix