Name: Mechanic In A Bottle Hydraulic Oil Fix &amp; Stabilizer
SKU: 2724
Availability: InStock

Mechanic In A Bottle Hydraulic Oil Fix & Stabilizer

$39.89 – $131.24

Description

MECHANIC IN A BOTTLE HYDRAULIC OIL FIX & STABILIZER – FIXES & PREVENTS EMULSIFIED OIL & RESTORES VISCOSITY.

WORKS IN ALL OILS:

HYDRAULIC, ENGINE (CONVENTIONAL, SYNTHETIC), GEAR, TRANSMISSION, POWER STEERING, TRANSFER CASE, TURBINE, COMPRESSOR, DIFFERENTIAL, MORE.

Features/Benefits/Applications

1. - - - ADDS LUBRICITY
      - ANTI-CORROSION
      - NEUTRALIZES ACIDS
      - NANO-ENCAPSULATES WATER
      - HELPS FIX EMULSIFIED OIL
      - INCREASES BASE NUMBER
      - PATENT PENDING

DOES NOT CONTAIN HARMFUL:

1. - - - PETROLEUM DISTILLATES
      - ALCOHOL
      - GLYCOL ETHERS

MIB Hydraulic Oil Fix & Stabilizer helps improve performance and overall results:

INSTRUCTIONS: SHAKE WELL, STORE ABOVE FREEZING.

FIRST DETERMINE TOTAL SYSTEM OIL CAPACITY* (INCLUDING TANK, HOSES, PUMPS, RAMS, VALVES, ETC.)

For example, in a 20-gallon (2560 ounces) system, if adding 3% of OIL FIX to total system capacity, you would add 76 ounces of OIL FIX.

IMPORTANT! BEFORE ADDING OIL FIX, RUN EQUIPMENT UNTIL ENTIRE HYDRAULIC SYSTEM OIL REACHES OPERATING TEMPERATURE. ONCE OIL FIX IS ADDED, KEEP RUNNING OR OPERATE EQUIPMENT FOR APPROXIMATELY 1 HOUR TO ENSURE OIL FIX THOROUGHLY MIXES WITH ALL OIL WITHIN THE ENTIRE HYDRAULIC SYSTEM.

TO EXTEND THE LIFE OF CLEAN OIL & HELP PREVENT FUTURE PROBLEMS: ADD 1% of OIL FIX of the total system capacity. Run & mix thoroughly.

IF MILKY / EMULSIFIED OIL IS DETECTED: DRAIN SYSTEM AND ADD FRESH OIL: Then, ADD 3% of OIL FIX of the total system capacity. Run & mix thoroughly until oil is clear.

* AT ANY TIME, DO NOT LET THE AMOUNT OF HYDRAULIC OIL FIX IN THE ENTIRE SYSTEM EXCEED 3% OF THE TOTAL SYSTEM CAPACITY.

RESULTS IMPROVE OVER TIME WITH USE. For best results, after emulsified oil clears, replace oil. Faster results achieved if oil is warm instead of cold. If product freezes or crystallizes, warm product in sun or heat, mix and then use.

For additional information or questions visit the product page at www.B3CFuel.com or call 843-347-0482.

Understanding Oil Problems & Solutions »

Product Overview Sheet »

Technical Bulletin: Why It is Impossible to get Emulsified Oil / Water or DEF out of Your Hydraulic System »

For SDS, please call B3C Fuel Solutions at 843.347.0482.

For resale opportunities, call B3C Fuel Solutions directly at 843.347.0482.

Additional information

Weight	N/A
Size	24 oz. Bottle, Gallon Jug

What They Say

About B3C's Products

I received information about Ethanol Shield from Yamada Nursery. I used it in my lawn mower and then put it in my car and got very good results. I now recommend your product to all of car collector friends.

~ John W.

I've used Ethanol Shield for several years in my: 1940 car that I rarely start, blue bird day only '72 Honda 500 motorcycle, spring/fall power washer, fall only leaf blower, and when need be chain saw.

...and they all start every time!

- Mike G.

Used this product for almost a year, no issues whatsoever. Believe it’s does what it says it’s supposed to do.

- Shawn Walker

You'll hear when this stuff hits your engine. Makes everything all better!

- Joesph B Moffett

I must say that it lived up to all the hype. I've used it in several small engines from rototillers and snow blowers to atvs and go karts and it has worked in all of them. Many of them ran very rough and wouldn't idle, or wouldn't start at all, but after adding MIB they all run much better and continue to improve the longer they run. I added some to my truck that would missfire intermittently and after just a couple of days it was running much smoother and the check engine light went out. I'm very impressed with this to say the least.

- Allan

I've used it in a few different situations where either a two-cycle motor was running rough or a four-cycle wouldn't start. Just following the directions was all that was needed. To help the solution do it's job, I always have the battery fully charged in the situations where I have and electric starter. It is worth having a bottle or two of this stuff around if you have a lot of engines that must be stored or not used daily (especially seasonal stuff).

- Jif

If you have gas powered equipment, never be out of this stuff. It’s a miracle in a jar. If you put it in you tanks of gas power equipment and let it sit it will start. If you find a piece of equipment that has stale old gas, a few ounces of this and it will start up.

- Terance LaCroix

I had problems with a snow blower that I used high ethanol gas in not starting. Added some Mechanic In A Bottle to an empty tank and let sit overnight - added gas w/Mechanic In A Bottle the next day & it fired up on the first pull. I love this stuff.

- Murphy@216

For about $20 every fall, one application of this to my snowblower gets and keeps it running through the winter, saving costly trips to the repair shop to clean/rebuild the carb. which I did for several years until figuing out it was always a fuel problem.

- S. Wilde

Forgot to put stabilizer in the gas of my outboard for over winter storage, with predictable results. Put some Mechanic in a bottle into the carb and let it sit for 24 hours. Started right up and ran better than ever. Sea Foam is good, but this stuff raises the bar.

- M.E. Dunn

PRODUCTS

ABOUT

RESOURCES

MORE

Mechanic In A Bottle Hydraulic Oil Fix & Stabilizer

Description

Additional information

Featured Fuel Solutions

DIESEL FUEL TREATMENT

Friction Fix

Mulch Stay-put

Lubricant Concentrate

Ethanol Shield Marine

Hydraulic Oil Fix