CATALOG      LOG-IN      SHOP     
×
MENU

Friction Fix Fuel, Oil, Hydraulic Treatment

Price range: $19.95 through $35.95

SKU: N/A Categories: , , ,

Description

Friction Fix CHEMICALLY Creates a silicon carbide ceramic nano-coating to drastically reduce friction*

Friction Fix is a concentrated fuel, oil, and hydraulic treatment designed to reduce “parasitic” friction. This is the unwanted resistance between moving metal parts that wastes energy as heat, vibration, and wear. Its chemistry creates a microscopic silicon-carbide ceramic nano-coating on metal surfaces, helping parts move more smoothly with less friction and wear. *ASTM testing has demonstrated up to 28% friction reduction and 49% wear reduction.

Add to your Gas and Diesel Fuel Tanks and Engine Oil
In oil and hydraulic systems, reducing frictional power loss can improve efficiency, smoothness, power and energy output while helping extend component and oil life. In fuel systems, it helps improve combustion, compression, horsepower and fuel efficiency while protecting against carbon and lacquer buildup. By reducing friction, wear, heat, vibration and stiction, Friction Fix helps more of the system’s energy go toward useful work rather than being lost to friction.

FRICTION FIX is highly efficient with treatment use at only 1% of the capacity of the oil system (vs. competitive products requiring up to 5 to 20%), 1 oz per 40 gallons of gas or diesel fuel, 6 oz per 20 gallons of hydraulic fluid, and 6 oz per gear oil system

Product Overview Sheet »

Additional information

Weight N/A
Bottles

One Bottle, Two Bottles

Featured Fuel Solutions
fuellife

Fuel Life

fuellife
spill-max

Spill Absorber Max

spill-max
oil-lock

No-Mess Oil Change

oil-lock
pump-saver

Pump Saver

pump-saver
product diesel gal

DIESEL FUEL TREATMENT

product diesel gal
friction-fix

Friction Fix

friction-fix

What They Say

About B3C's Products

I received information about Ethanol Shield from Yamada Nursery. I used it in my lawn mower and then put it in my car and got very good results. I now recommend your product to all of car collector friends.

~ John W.

I've used Ethanol Shield for several years in my: 1940 car that I rarely start, blue bird day only '72 Honda 500 motorcycle, spring/fall power washer, fall only leaf blower, and when need be chain saw.

...and they all start every time!

- Mike G.

Used this product for almost a year, no issues whatsoever. Believe it’s does what it says it’s supposed to do.

- Shawn Walker

You'll hear when this stuff hits your engine. Makes everything all better!

- Joesph B Moffett

I must say that it lived up to all the hype. I've used it in several small engines from rototillers and snow blowers to atvs and go karts and it has worked in all of them. Many of them ran very rough and wouldn't idle, or wouldn't start at all, but after adding MIB they all run much better and continue to improve the longer they run. I added some to my truck that would missfire intermittently and after just a couple of days it was running much smoother and the check engine light went out. I'm very impressed with this to say the least.

- Allan

I've used it in a few different situations where either a two-cycle motor was running rough or a four-cycle wouldn't start. Just following the directions was all that was needed. To help the solution do it's job, I always have the battery fully charged in the situations where I have and electric starter. It is worth having a bottle or two of this stuff around if you have a lot of engines that must be stored or not used daily (especially seasonal stuff).

- Jif

If you have gas powered equipment, never be out of this stuff. It’s a miracle in a jar. If you put it in you tanks of gas power equipment and let it sit it will start. If you find a piece of equipment that has stale old gas, a few ounces of this and it will start up.

- Terance LaCroix

I had problems with a snow blower that I used high ethanol gas in not starting. Added some Mechanic In A Bottle to an empty tank and let sit overnight - added gas w/Mechanic In A Bottle the next day & it fired up on the first pull. I love this stuff.

- Murphy@216

For about $20 every fall, one application of this to my snowblower gets and keeps it running through the winter, saving costly trips to the repair shop to clean/rebuild the carb. which I did for several years until figuing out it was always a fuel problem.

- S. Wilde

Forgot to put stabilizer in the gas of my outboard for over winter storage, with predictable results. Put some Mechanic in a bottle into the carb and let it sit for 24 hours. Started right up and ran better than ever. Sea Foam is good, but this stuff raises the bar.

- M.E. Dunn

Join Us!

For News & Discounts